How to flash any Android MTK Device using SP Flash Tool | WIKIBAN

13 July 2016

How to flash any Android MTK Device using SP Flash Tool

Share...

Share on Facebook
Share on Twitter
Google Plus
SP Flashtool is one of the very useful softwares in flashing MTK Android devices because of its simplicity and convenience. Even a person with a low or little computer knowledge can use SP flashtool and solve software problem of hang on logo, restarting, auto turn on internet connection, auto turn on wifi connection, auto apk installing, auto gone balance, pattern lock, screen lock and others.
This tutorial covers the basic aspect on how to flash any MTK android device step by step to help you in flashing the stock rom or custom rom of your phone. All that is required here is your utmost attention and a USB Cable to use in addition with the phone you want to flash.

ATTENTION

Before you proceed to flash any kind of device its highly imperative to back up your important and personal files like contacts, music, videos, picture and other stuff you may need, so as not to loss your data because the process is irreversible. If your phone is unable to boot, then no need to back up because you can't get a chance to do so. Also you need to charge your device at a minimum of 80% to avoid interruption of battery in the process of flashing your phone. Don't also forget to take into consideration that you will borne any mistake encountered in the process of flashing your device because we take no responsibility if you damage your phone mistakenly or otherwise.

How to Flash Stock Rom Using SP FlashTool

 
STEP 1: Download the specific firmware for your android phone by searching on Google

STEP 2: Download SP Flash Tool from here

STEP 3: Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC.
extracting sp flash tool

Remove the battery from the phone and slot it back in without booting the phone (If the battery is inbuilt then simply switch if off). Also, ensure there's a formatted SD card in the phone (if there's an SD card slot)

Open the Extracted folder and run SP flashtool as an administrator
running sp flash tool as an administrator


Click on Scatter-loading by the right
loading scatter file on sp flashtool

In the window that pops up, select the scatter file for your phone model then click Open (scatter file is a text file with the word "scatter" in its name )
selecting scatter file to load


A list with ticked boxes should appear in SP flash tool (preloader, mbr, ebr etc)
tick boxes on sp flashtool
Once the file(s) you wish to flash is (are) ticked, click Download (with an arrow above it) 
click on download to start flashin phone

Stop should now be prominent while other options should be grayed out, Connect the switched off phone (with battery inside) to the PC via USB cord, a progress bar should start running

flashin in process
Wait till you get a Success message (green circle with OK), do not interrupt before then
flashing completed with a success message

Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone.
Ensure to do a factory reset in recovery mode to clear any errors


If you don't want to miss any of our latest update you can subscribe here with your email address or you can follow us on facebook to get the latest updates about tech and more.

Don't forget to share!!!
Share :

zealmatblog

No comments:

Post a Comment