How to Flash Lenovo A526 with SP FlashTool | WIKIBAN

13 July 2016

How to Flash Lenovo A526 with SP FlashTool

Share...

Share on Facebook
Share on Twitter
Google Plus
Depending on the reason you need to flash your device, a deep concentration is needed to aid the succession of your work. many different kind of reason will put you to flash your device stock Rom had it been problems of hang on logo, restarting, auto turn on internet connection, auto turn on wifi connection, auto apk installing, auto gone balance, pattern lock, screen lock and others. Flashing any kind of device is as easy as simple as long as you get all the necessary files to do so with a little or basic computer knowledge. And don't still forget that your attention is highly needed to achieve success in the process.

Important Note

Before you proceed to flash any kind of device its highly imperative to back up your important and personal files like contacts, music, videos, picture and other stuff you may need, so as not to loss your data because the process is irreversible. If your phone is unable to boot, then no need to back up because you can't get a chance to do so. Also you need to charge your device at a minimum of 80% to avoid interruption of battery in the process of flashing your phone. Don't also forget to take into consideration that you will borne any mistake encountered in the process of flashing your device because we take no responsibility if you damage your phone mistakenly or otherwise.
how to flash lenovo A526

Requirement

•    Lenovo A526 device with good battery charged, do not try with low battery
•    Lenovo A526 Stock ROM Firmware | Download here
•    Lenovo A526 SP Flash Tool | Download here
•    Lenovo A526 USB (Flashing) Driver | Download here
•    Good Quality Micro USB Cable
•    Computer or Laptop

Procedure for Flashing Lenovo A526

  • First take all of files which need for flashing or upgrade from the above link, if link not working just leave comment on below comment box
  • Install WinRAR software in your Computer or Laptop, if already installed then ignore
  • UnZIP to any path you want from the WinRAR
  • Open Sp Flash tool and choose flash_tool.exe file and open it
  • Click on Scatter-loading button and choose MT6582_scatter_W1315V15V111.txt file
  • Click on Download button and Just Insert USB Cable to Device, wait until driver finished installing then download start automatically, if driver is not installed then try to manual update from the above link's driver
  • If the device is dead and doesn't detect the phone after inserting USB Cable then try to Press and hold Volume Up button and Insert USB Cable (Note: You can use Volume Down button also for detection)
  • Wait until the process is finished, do not try to unplug while device in flashing mode
  • Congratulation you are done
If you are new to using SP Flashtool Check here for extensive Guide


If you don't want to miss any of our latest update you can subscribe here with your email address or you can follow us on facebook to get the latest updates about tech and more.

Don't forget to share!!
Share :

zealmatblog

No comments:

Post a Comment