WIKIBAN: Rooting
Showing posts with label Rooting. Show all posts
Showing posts with label Rooting. Show all posts

1 September 2016

How to Root Gionee Elife S Plus and Unlock its Bootloader for Android 6 Marshmallow

Gionee recently released an update for the Gionee Elife S Plus taking it from Android 5.x (Lollipop) to Android 6.0 (Marshmallow). Recall that Team Hovatek had released the rooting technique for the Gionee Elife S Plus running on Android 5 Lollipop. For those who’ve upgraded to Marshmallow, there’s yet another difficulty rooting. This guide will teach you how to root your Gionee Elife S Plus after upgrading to Android 6.0 Marshmallow.

Take into consideration that before rooting your Gionee S Plus you need to unlock its bootloader to give you access to execute a command and in the process of unlocking Gionee S Plus bootloader you need to be familiar with the process of setting ADB and Fastboot on your PC before unlocking its bootloader and consequently, to arrive at the rooting of your device. Don't worry all the steps required are explained below in details, but before you begin make sure you download all the files below as its the prerequisites of rooting your Gionee Elife S Plus.

Requirements

Now the first step is to unlock Gionee S Plus bootloader but apparently we need to install ADB and Fastboot on our PC Check here for how to install ADB & Fastboot
After installing the ADB drivers on your PC lets look at how you can unlock Gionee S Plus Bootloader 

How to Unlock the Bootloader of Gionee S Plus

  • First and foremost back up your personal stuff because this process will wipe your phone data
  • Enable USB debugging by going to: settings>developer options>usb debugging and if you can't find developer options on the setting go to "about" and press the "build number options 5 times (tap it five times to enable the developer options.
  • Enable OEM unlocking under setting>developer options
  • connect the phone with a usb while the phone is on
  • launch ADB
  • in the ADB run the following command and (press enter after)
adb devices
  • now adb will detect your phone i.e. Gionee S Plus
  • after adb detect your device, boot it into fastboot by running the following commands
adb reboot-bootloader
  • the phone will now reboot and enter fastboot (black screen with only fastboot written at the top or bottom
  • in fastboot run the following command on your device (press enter after)
fastboot oem unlock
  • You should get a prompt on the device asking you to confirm Bootloader unlock, press the volume up button for Yes
  • You should now get a success message
  • reboot the device by running the command below
fastboot reboot
Note: if you are getting the message  “unlock operation is not allowed” when trying to unlock your bootloader then go back and make sure that you enable OEM Unlocking under developer options on your device.
Now after you have successfully unlock the bootloader of Gionee S Plus lets proceed on the final process on how to root your device easily.

How to Root Gionee S Plus

  • After downloading the above superSU, copy it to both SD card and Internal Storage
  • Extract and copy the TWRP recovery image you earlier downloaded above and paste it into the same folder as fastboot.exe and adb.exe (the location is above)
  • Connect the phone to the PC again using usb while the phone is on and boot it into fastboot with this command adb reboot-bootloader and press enter
  • Now the phone will restart and boot itself into fastboot
  • when the phone enter fastboot, flash the recovery.img to the phone by typing this command fastboot boot recovery.img and press enter
  • the phone should now boot into TWRP recovery
  • In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY
  • In TWRP, you use the Volume up button to scroll up, Volume down button to scroll down and Power button to select
  • If TWRP offers to root the phone, select NO
  • In the TWRP Recovery, tap Install
  • Scroll down to Install zip and select it
  • Navigate to the location of SuperSu.zip and select it
  • Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
  • Reboo the device
  • Confirm Root by installing and running Root Checker
how to easily root gionee elife s plus

Recommended: Root tecno C9

If you dont want to miss any of our latest update you can subscribe here with your email address or you can follow us on facebook to get the latest updates about tech and more.
 

Don't forget Share.
Read More »

How to Easily Root Infinix Hot S X521

Infinix Hot S X521 is one of the latest Infinix devices running Android 6.0 (Marshmallow) making it not really supporting Apks for rooting. As you all know that rooting your android phone could really void the warranty of your device and as such, the consideration of doing so lies on you alone and all other incidents and/or accidents make it fully your responsibility. All Credit goes to team hovatek for porting up the TWRP for Infinix Hot X521.

With everything on ready let move on the process on how to root your Infinix Hot S X521 easily without having much stress.

How to Root Infinix Hot S X521

  1. Install VCOMM Drivers on your PC Here
  2. Download SuperSu 2.66 .zip Here
  3. Copy the SuperSU.zip file to both your memory card and phone internal storage
  4. Download TWRP Here
  5. Switch off the device
  6. Flash the TWRP Recovery.img to the phone using sp flashtool, if you don't know how to check here 
  7. Boot the Device into Recovery mode using Vol up + Power Button
  8. In TWRP, if you get a prompt asking you to swipe to allow modification of  system partition,TAP Keep Read only 
  9. If TWRP offers to root the phone, select NO
  10. In the TWRP Recovery, tap Install
  11. Browse to the location of the superSU and select it
  12. Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
  13. reboot the device
  14. confirm the status of the root by installing and running root checker
easy method to root infinix hot s
 
Any problem encountered, Drop it via the comment box below

Read Also: How to root tecno C8



If you dont want to miss any of our latest update you can subscribe here with your email address or you can follow us on facebook to get the latest updates about tech and more.
 

Don't forget Share.
Read More »

12 August 2016

How to Easily Root Tecno Camon C9 Plus Unlocking its Bootloader

As you all know Tecno Camon C9 is a recently lunch device by Tecno and the device is running Android 6 Marshmallow which we cannot be able to Root it using Kingroot as always possible which requires alot of tedious step to achieve success in rooting your tecno C9 successfully. We all know the benefit we can drive after rooting our Android Smartphone because of the magnificent features requires root access in other to enjoy your device unlimited. As of before rooting Android devices running version 5 (lollipop) and below is much simpler by just tapping one-click root access using Kingroot.


Since tecno Camon C9 is running Android Marshmallow we need to go through some long process in other to achieve success in rooting our device here which requires much attention and understanding of what you are doing in other to get a positive result.

You May Also Read: How to Root Tecno W3


Now without wasting much of effort and time lets get to whats required in other to root your tecno Camon C9 and enjoy the benefit. All thanks to team hovatek for providing the ported TWRP recovery of the phone.


Take into consideration that before rooting your tecno C9 you need to unlock its bootloader to give you access to execute a command and in the process of unlocking tecno Camon C9 bootloader you need to be familiar with the process of setting ADB and Fastboot on your PC before unlocking its bootloader and consequently, to arrive at the rooting of your device. Don't worry all the steps required are explained below in details, but before you begin make sure you download all the files below as its the prerequisites of rooting your tecno camon C9.


Requirements

Now the first step is to unlock tecno C9 bootloader but apparently we need to install ADB and Fastboot on our PC


How to install ADB & Fastboot

  • After downloading the ADB & Fastboot from the above link
  • Run the Installer as an Administrator
  • For "Do you want to install ADB and Fastboot?" tap the Y key then press Enter
  • For "Install ADB system-wide?" tap the Y key then press Enter
  • wait till its complete
  • For "Do you want to install device drivers?" tap the Y key then press Enter
  • In the installer Wizard that pops up, click Next
  • Click Finish when done
  • Go to My Computer / Local Disk ( C: ) , you should see a folder named ADB
  • to run adb or fastboot open the adb folder
  • hold down the SHIFTkey on the keyboard
  • while holding down the SHIFT key right click on an empty space in the adb folder
  • Select open command window here
  • now you are good to go
After installing the ADB drivers on your PC lets look at how you can unlock tecno camon C9 Bootloader


How to Unlock the Bootloader of Tecno C9

  • First and foremost back up your personal stuff because this process will wipe your phone data
  • Enable USB debugging by going to: settings>developer options>usb debugging and if you can't find developer options on the setting go to "about" and press the "build number options 5 times (tap it five times to enable the developer options.
  • Enable OEM unlocking under setting>developer options
  • connect the phone with a usb while the phone is on
  • launch ADB
  • in the ADB run the following command and (press enter after)
adb devices
  • now adb will detect your phone i.e. tecno C9
  • after adb detect your device, boot it into fastboot by running the following commands
adb reboot-bootloader
  • the phone will now reboot and enter fastboot (black scree with only fastboot written at the top or bottom
  • in fastboot run the following command on your device (press enter after)
fastboot oem unlock
  • You should get a prompt on the device asking you to confirm Bootloader unlock, press the volume up button for Yes
  • You should now get a success message
  • reboot the device by running the command below
fastboot reboot
now after you have successfully unlock the bootloader of tecno C9 lets proceed on the final process on how to root your tecno C9 easily 

How to Root tecno Camon C9

  • After downloading the above superSU, copy it to both SD card and Internal Storage
  • Extract and copy the TWRP recovery image you earlier downloaded above and paste it into the same folder as fastboot.exe and adb.exe (the location is above)
  • Connect the phone to the PC again using usb while the phone is on and boot it into fastboot with this command adb reboot-bootloader and press enter
  • Now the phone will restart and boot itself into fastboot
  • when the phone enter fastboot,flash the recovery.img to the phone by typing this command fastboot boot recovery.img and press enter
  • the phone should now boot into TWRP recovery
  • In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY
  • In TWRP, you use the Volume up button to scroll up, Volume down button to scroll down and Power button to select
  • If TWRP offers to root the phone, select NO
  • In the TWRP Recovery, tap Install
  • Scroll down to Install zip and select it
  • Navigate to the location of SuperSu.zip and select it
  • Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
  • Reboo the device
  • Confirm Root by installing and running Root Checker
how to easily root tecno C9

Now you have successfully root your latest tecno C9 device with the given steps
If you encounter problem while unlocking the bootloader i.e. to say the adb detect other devices but not tecno C9 then it may be adb clash check here for solution.

if you are getting the message  “unlock operation is not allowed” when trying to unlock your bootloader then go back and make sure that you enable OEM Unlocking under developer options on your device and also when your device prompted that there is a missing root, don't forget to select NO as selecting yes will brick you device, so be xtra careful.


Read Also: How to root Gionee S Plus

lay other problem on the comment below


If you dont want to miss any of our latest update you can subscribe here with your email address or you can follow us on facebook to get the latest updates about tech and more.
 

Don't forget Share.
Read More »

16 July 2016

How to Easily Root Tecno W3

Tecno W3 is one of the latest tecno devices running Android 6.0 (Marshmallow) making it not really supporting Apks for rooting. As you all know that rooting your android phone could really void the warranty of your device and as such, the consideration of doing so lies on you alone and all other incidents and/or accidents make it fully your responsibility. All Credit goes to team hovatek for porting up the TWRP for tecno W3.

With everything on ready let move on the process on how to root your tecno W3 easily without having much stress.
how to root tecno w3

How to Root Tecno W3

  1. Install VCOMM Drivers on your PC Here
  2. Download SuperSu 2.66 .zip Here
  3. Copy the SuperSU.zip file to both your memory card and phone internal storage
  4. Download TWRP Here
  5. Switch off the device
  6. Flash the TWRP Recovery.img to the phone using sp flashtool, if you don't know how to check here 
  7. Boot the Device into Recovery mode using Vol up + Power Button
  8. In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition, then go ahead and swipe. To swipe, place your finger on the green circle then slide it to the right
  9. In the Recovery, tap Install
  10. Browse to the location of the superSU and select it
  11. Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
  12. reboot the device
  13. confirm the status of the root by installing and running root checker
 Any problem encountered, Drop it via the comment box below

Read Also: How to root Tecno C8
                       How to root tecno C9

If you dont want to miss any of our latest update you can subscribe here with your email address or you can follow us on facebook to get the latest updates about tech and more.
 

Don't forget Share.
 
Read More »

5 May 2016

Easy method to Root Tecno Camon C8 with SP Flash Tool

Despite the fact that many are not using Android 6.0 Marshmallow which research has shown earlier, Google is trying to make everything easier and simple but someone tough than the other OS.

its been a while we have discuss on how to upgrade your Tecno Camon C8 to Android 6.0 Marshmallow which many of tecno Camon C8 users successfully updated there device. I have been receiving so many queries from our fans of how someone can root his tecno camon c8 which the KingRoot Method proves to be abortive. Having upgraded you Camon C8 without rooting is just another means of getting car without fuel because in the era of this technological advancement you can't really enjoy your device that is not rooted as a result of some features which are limited to a non-rooted Android device.

All the credit goes to team Hovatek for getting the ClockWorkMod recovery of Tecno Camon C8 (Android 6.0)which will be utilise in rooting your device. The rooting process is ain't gonna take much time because if your familiar on how to use Sp Flash tool, you can finish that in a moment.

Read Also: How to root tecno C9

Now lets see how you can you root Tecno C8 easily
Note: this method is only applicable for Tecno C8 running Android 6.0 Marshmallow.

Requirements

  1. PC
  2. Vcomm Drivers. Download it here 
  3. Super SU. download it here
  4. CWM for Tecno C8 ported by Hovatek download here 
  5. SP Flash Tool. Download here
After getting all the listed files above let's see how you can install Vcomm drivers on your PC before proceeding 

How to install VCOMM driver on PC

  1. Extract the downloaded software i.e. vcomm in the above link
  2. Open Command Prompt by searching for cmd on the start
  3. After opening command prompt type hdwwiz and press enter to open add hardware wizard or alternatively go to device manager and click action in the above tab , click add legacy hardware
  4. After opening up add hardware wizard
  5. click next and choose Advanced option and click next again
  6. select 'show all devices' and click next again
  7. Choose 'Have disk
  8. Browse through your extracted Vcomm folder and select the driver setup file and click open
  9. Choose Mediatek Preloader usb Vcomm driver and click install to install it
  10. that's it but if you cant be able to do so check hovatek guide here

 How to Root Tecno Camon C8

  1.  Save the SuperSU you downloaded above on your SD card
  2.  Unzip the CWM zip file and flash the recovery image to the phone using SP flash tool, check here for excellent guide on how to flash the recovery.
  3. After flashing the CWM zip file, boot the phone into recovery mode by using volume up + power button
  4. in Clockworkmod recovery mode, you use the Volume up button to scroll up, Volume down button to scroll down and Power button to select
  5. Scroll down to "install Zip' and select it
  6. Select Choose zip from storage/sdcard1
  7. Navigate to the location of SuperSu.zip and select it Usually on the root folder
  8. Select Yes – Install SuperSU to confirm flashing
  9. Wait till flashing is complete
  10. Return to the home screen (using the back option) then select Reboot 
  11. If CWM offers to help fix a missing Root, select No 
  12. Confirm Root by installing and running Root Checker
  13. That's it you have successfully rooted your Tecno Camon C8 with the Above step.

how to root tecno camon c8 with sp flash tool easily


With the above procedure you can do that simpe and easy

Now tell us the problem you encounter
We always strive to give you quality contents and if you don't want to miss any of our latest updates, kindly click here to subscribe with your email address and dont forget to check your inbox for confirmation
Sharing is Sexy

Read More »

27 April 2016

Root your Android 5.0, 5.1 lollipop and Android 6.0 Marshmallow with the latest KingRoot V4.85

We all know rooting our phone is something which isreally normal in the tech industry in other to enjoy more fascinating and amazing features of the phone. Device that is not rooted is limited to many number of basic features, and we all know that rooting your phone will actually void your device warranty.

Android 5.0, 5.1 lollipop device and Android 6.0 Marshmallow users are finding it hard enough to root there devices in other to enjoy more fascinating features like using some VPN apps and other softwares to rock your device perfect.

Kingroot has been the best Android Rooting software for a while and its also the best in terms of rooting stubborn Android devices like marshmallow and lollipop, the App has been updated with so many features to support the rooting of your phone without any PC with just a single click.

Well without wasting much effort and time let see how you can root your Android smartphone device easily with KingRoot V4.85

Requirements

  • 70% battery charge
  • latest version of KingRoot (download below)
  • Accessible Internet Connection on your phone with enough data (20MB)
  • And lastly, your Attention
Download KingRoot V4.85 here

How to Root your Stubborn device

Download KingRoot on the above link given and install it on your device

Now run the application, it will start analyzing your device which will take a while, wait for it to finish then you will see the main interface window with some Chinese language.

how to root android marshmallow and lollipop with kingroot
After making sure that you have a strong internet connection, just tap on the big green circle label "root" and the rooting process will start immediately

Upon completion of the Rooting process you should see a big green circle mark success with a green bar below showing your that the rooting process is done.
you can download root checker from playstore to check root access


We always strive to give you quality contents and if you don't want to miss any of our latest updates, kindly click here to subscribe with your email address and dont forget to check your inbox for confirmation
Read More »